On February 26th, 2020, researchers Štefan Svorencík and Robert Lipovsky disclosed a vulnerability in the implementation of the wireless egress packet processing of certain Broadcom Wi-Fi chipsets. This vulnerability could allow an unauthenticated, adjacent attacker to decrypt Wi-Fi frames without the knowledge of the Wireless Protected Access (WPA) or Wireless Protected Access 2 (WPA2) Pairwise Temporal Key (PTK) used to secure the Wi-Fi network. The vulnerability exists because after an affected device handles a disassociation event it could send a limited number of Wi-Fi frames encrypted with a static, weak PTK. An attacker could exploit this vulnerability by acquiring these frames and decrypting them with the static PTK. A successful exploit could allow the attacker to decrypt Wi-Fi frames without the knowledge of the security session establishment used to secure the Wi-Fi network. Multiple Cisco wireless products are affected by this vulnerability. Cisco will release software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20200226-wi-fi-info-disclosure
On February 26th, 2020, researchers Štefan Svorencík and Robert Lipovsky disclosed a vulnerability in the implementation of the wireless egress packet processing of certain Broadcom Wi-Fi chipsets. This vulnerability could allow an unauthenticated, adjacent attacker to decrypt Wi-Fi frames without the knowledge of the Wireless Protected Access (WPA) or Wireless Protected Access 2 (WPA2) Pairwise Temporal Key (PTK) used to secure the Wi-Fi network.
The vulnerability exists because after an affected device handles a disassociation event it could send a limited number of Wi-Fi frames encrypted with a static, weak PTK. An attacker could exploit this vulnerability by acquiring these frames and decrypting them with the static PTK. A successful exploit could allow the attacker to decrypt Wi-Fi frames without the knowledge of the security session establishment used to secure the Wi-Fi network.
Multiple Cisco wireless products are affected by this vulnerability.
Cisco will release software updates that address this vulnerability. There are no workarounds that address this vulnerability.
This advisory is available at the following link:
https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20200226-wi-fi-info-disclosure
Cisco is investigating its product line to determine which products may be affected by this vulnerability. As the investigation progresses, Cisco will update this advisory with information about affected products, including the ID of the Cisco bug for each affected product.
For information about whether a product is affected by this vulnerability, refer to the Vulnerable Products and Products Confirmed Not Vulnerable sections of this advisory. The Vulnerable Products section includes Cisco bug IDs for each affected product. The bugs are accessible through the Cisco Bug Search Tool and contain additional platform-specific information, including workarounds (if available) and fixed software releases.
Product | Cisco Bug ID | Fixed Release Availability |
---|---|---|
Routing and Switching - Enterprise and Service Provider | ||
Cisco Connected Grid Routers | CSCvs87927 | |
Routing and Switching - Small Business | ||
Cisco RV160x and RV260x VPN Routers | CSCvt23810 | |
Cisco RV340W Dual WAN Gigabit Wireless-AC VPN Router | CSCvs87875 | |
Cisco Small Business RV Series RV110W Wireless-N VPN Firewall | CSCvs87870 | |
Cisco Small Business RV Series RV215W Wireless-N VPN Router | CSCvs87874 | |
Cisco Small Business RV130 Series VPN Routers | CSCvs87871 | |
Cisco WAP125 Wireless-AC Dual Band Desktop Access Point with PoE | CSCvs87868 | |
Cisco WAP150 Wireless-AC/N Dual Radio Access Point with PoE | CSCvs87877 | |
Cisco WAP361 Wireless-AC/N Dual Radio Wall Plate Access Point with PoE | CSCvs87877 | |
Cisco WAP571 Wireless-AC/N Premium Dual Radio Access Point with PoE | CSCvs93095 | |
Cisco WAP571E Wireless-AC/N Premium Dual Radio Outdoor Access Point | CSCvs93095 | |
Voice and Unified Communications Devices | ||
Cisco IP Phone 8861 | CSCvs87895 | |
Cisco Wireless IP Phone 8821 | CSCvs87896 | |
Video, Streaming, TelePresence, and Transcoding Devices | ||
Cisco Webex Board (all models) | CSCvs91690 | |
Cisco Webex Desk Pro | CSCvs91690 | |
Cisco Webex Room Series | CSCvs91690 | |
Wireless | ||
Cisco Catalyst 9115 Series Wi-Fi 6 Access Points | CSCvs87888 | |
Cisco Catalyst 9120 Series Access Points | CSCvs87888 | |
Cisco Small Business 100 Series Wireless-N Access Points | CSCvs87879 | |
Cisco Small Business 300 Series Wireless-N Access Points | CSCvs87879 | |
Cisco Meraki MR26 | N/A | |
Cisco Meraki MR32 | N/A | |
Cisco Meraki MR34 | N/A | |
Cisco Meraki MR72 | N/A | |
Security | ||
Cisco Meraki MX64W | N/A | |
Cisco Meraki MX65W | N/A |
For additional information about the impact of this vulnerability on Cisco Meraki, see the Cisco Meraki Customer Advisories.
Voice and Unified Communications Devices
Only products listed in the Vulnerable Products section of this advisory are known to be affected by this vulnerability.
Endpoint Clients and Client Software
Routing and Switching - Enterprise and Service Provider
Routing and Switching - Small Business
Voice and Unified Communications Devices
Video, Streaming, TelePresence, and Transcoding Devices
Wireless
When a disassociation event is triggered, an affected device will delete the user-configured PTK as part of a sequence of cleanup operations. A number of Wi-Fi frames still buffered in the hardware egress queue could then be transmitted while encrypted with a static, weak PTK.
There are two ways to acquire Wi-Fi frames encrypted with the static PTK:
The frames affected by the weak encryption are the only ones present in the hardware egress buffer during the processing of a disassociation event. Further frames will not be accepted or queued. Under no circumstances can the attacker control the content or number of frames. This limits the information that can be obtained in case of successful exploitation of the vulnerability described in this advisory.
There are no workarounds that address this vulnerability.
When considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories and Alerts page, to determine exposure and a complete upgrade solution.
In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.
See the Details section in the bug ID(s) in the Vulnerable Products section for the most complete and current information.
The vulnerability described in this advisory was discussed during the RSA conference of February 26, 2020.
The Cisco Product Security Incident Response Team (PSIRT) is aware that proof-of-concept exploit code is available for the vulnerability that is described in this advisory.
Cisco PSIRT is not aware of any malicious use of the vulnerability that is described in this advisory.
Security researchers Štefan Svorencík and Robert Lipovsky of ESET have reported this vulnerability to the Industry Consortium for Advancement of Security on the Internet (ICASI).
Cisco collaborated with ICASI during the investigation and disclosure of this vulnerability. More information can be found at http://www.icasi.org
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
Version | Description | Section | Status | Date |
---|---|---|---|---|
1.2 | Updated Vulnerable Products, and included information about the impact of this vulnerability on Cisco Meraki products. | Vulnerable Products | Interim | 2020-APR-28 |
1.1 | Updated Vulnerable Products, Products Confirmed Not Vulnerable, and included information about publicly available code to exploit this vulnerability. | Vulnerable Products, Products Confirmed Not Vulnerable | Interim | 2020-MAR-25 |
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME. CISCO EXPECTS TO UPDATE THIS DOCUMENT AS NEW INFORMATION BECOMES AVAILABLE.
A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.