A vulnerability in the ingress flow creation functionality of Cisco Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to cause the CPU to increase upwards of 100 percent utilization, causing a denial of service (DoS) condition on an affected system. The vulnerability is due to incorrect handling of an internal software lock that could prevent other system processes from getting CPU cycles, causing a high CPU condition. An attacker could exploit this vulnerability by sending a steady stream of malicious IP packets that can cause connections to be created on the targeted device. A successful exploit could allow the attacker to exhaust CPU resources, resulting in a DoS condition during which traffic through the device could be delayed. This vulnerability applies to either IPv4 or IPv6 ingress traffic either to or across an affected device. Cisco has released software updates that address this vulnerability. There are workarounds that address this vulnerability. This advisory is available at the following link: https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180418-asa2
Customers who use Cisco Adaptive Security Device Manager (ASDM) to manage devices can locate the software release in the table that appears in the login window or the upper-left corner of the Cisco ASDM window.ciscoasa# show version | include Version
Cisco Adaptive Security Appliance Software Version 9.4(4)
Device Manager Version 7.4(1)
To determine which Cisco Firepower System Software release is running on a device, administrators can log in to the device and use the show version command in the CLI. The following example shows the output of the command for a device that is running Release 6.2.0:
> show version
---------------------[ ftd ]---------------------
Model : Cisco ASA5525-X Threat Defense (75) Version 6.2.0 (Build 362)
UUID : 2849ba3c-ecb8-11e6-98ca-b9fc2975893c
Rules update version : 2017-03-15-001-vrt
VDB version : 279
----------------------------------------------------
Cisco has released free software updates that address the vulnerability described in this advisory. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license: http://www.cisco.com/en/US/docs/general/warranty/English/EU1KEN_.html
Additionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.
When considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories and Alerts page, to determine exposure and a complete upgrade solution.
In all cases, customers should ensure that the devices to upgrade contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.
Customers Without Service Contracts
Customers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC: http://www.cisco.com/en/US/support/tsd_cisco_worldwide_contacts.html
Customers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.
Cisco ASA Major Release |
First Fixed Release for This Vulnerability | Recommended Fixed Release for All the Vulnerabilities Described in the Collection of Advisories |
---|---|---|
Prior to 9.11 |
Migrate to 9.1.7.20 |
9.1.7.20 |
9.1 | 9.1.7.20 |
9.1.7.20 |
9.2 |
9.2.4.27 |
9.2.4.27 |
9.31 |
Migrate to 9.4.4.13 | 9.4.4.14 |
9.4 | 9.4.4.13 |
9.4.4.14 |
9.51 |
Migrate to 9.6.3.17 |
9.6.4.6 |
9.6 | 9.6.3.17 |
9.6.4.6 |
9.7 | 9.7.1.16 |
9.7.1.24 |
9.8 | 9.8.2.14 |
9.8.2.28 |
9.9 | 9.9.1 | 9.9.2.1 |
1Cisco ASA Software releases prior to 9.1 and ASA releases 9.3 and 9.5 have reached End of Software Maintenance. Customers should migrate to a supported release.
The software is available for download from Cisco Software Center by navigating to Products > Security > Firewalls > Adaptive Security Appliances (ASA) > ASA 5500-X Series Firewalls where there is a list of ASA hardware platforms. The majority of these software releases are listed under Interim.
Cisco FTD Major Release |
Recommended Fixed Release for This Vulnerability | Recommended Fixed Release for All the Vulnerabilities Described in the Collection of Advisories |
---|---|---|
6.0 | Migrate to 6.1.0.6 or later |
Cisco_FTD_SSP_Hotfix_EI-6.1.0.7-2.sh (41xx and 9300 FTD hardware platform) Cisco_FTD_Hotfix_EI-6.1.0.7-2.sh (All FTD hardware platforms except 41xx and 9300) |
6.0.1 | Migrate to 6.1.0.6 or later |
Cisco_FTD_SSP_Hotfix_EI-6.1.0.7-2.sh (41xx and 9300 FTD hardware platform) Cisco_FTD_Hotfix_EI-6.1.0.7-2.sh (All FTD hardware platforms except 41xx and 9300) |
6.1.0 | 6.1.0.6 |
Cisco_FTD_SSP_Hotfix_EI-6.1.0.7-2.sh (41xx and 9300 FTD hardware platform) Cisco_FTD_Hotfix_EI-6.1.0.7-2.sh (All FTD hardware platforms except 41xx and 9300) |
6.2.0 |
6.2.0.5 |
6.2.0.5 |
6.2.1 |
Migrate to 6.2.2.2 |
Cisco_FTD_SSP_Hotfix_BD-6.2.2.3-4.sh.REL.tar (41xx and 9300 FTD hardware platforms) Cisco_FTD_SSP_FP2K_Hotfix_BD-6.2.2.3-4.sh.REL.tar (21xx FTD hardware platform) Cisco_FTD_Hotfix_BD-6.2.2.3-4.sh.REL.tar (All other FTD hardware platforms) |
6.2.2 |
6.2.2.2 |
Cisco_FTD_SSP_Hotfix_BD-6.2.2.3-4.sh.REL.tar (41xx and 9300 FTD hardware platforms) Cisco_FTD_SSP_FP2K_Hotfix_BD-6.2.2.3-4.sh.REL.tar (21xx FTD hardware platform) Cisco_FTD_Hotfix_BD-6.2.2.3-4.sh.REL.tar (All other FTD hardware platforms) |
6.2.3 | Not vulnerable |
Cisco_FTD_SSP_Hotfix_A-6.2.3.1-10.sh.REL.tar (41xx and 9300 FTD hardware platforms) Cisco_FTD_SSP_FP2K_Hotfix_A-6.2.3.1-10.sh.REL.tar (21xx FTD hardware platform) Cisco_FTD_Hotfix_A-6.2.3.1-10.sh.REL.tar (All other FTD hardware platforms) |
The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.
This vulnerability was found during resolution of a Cisco TAC support case.
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
Version | Description | Section | Status | Date |
---|---|---|---|---|
1.1 | Explicitly stated that both to-the-box and transit traffic can trigger this condition. Clarified use case for the "per-client-max" limit. | Summary, Workarounds | Final | 2018-April-23 |
1.0 | Initial public release. | - | Final | 2018-April-18 |
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.