A vulnerability in the IP Service Level Agreement (SLA) responder feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the IP SLA responder to reuse an existing port, resulting in a denial of service (DoS) condition. The vulnerability exists because the IP SLA responder could consume a port that could be used by another feature. An attacker could exploit this vulnerability by sending specific IP SLA control packets to the IP SLA responder on an affected device. The control packets must include the port number that could be used by another configured feature. A successful exploit could allow the attacker to cause an in-use port to be consumed by the IP SLA responder, impacting the feature that was using the port and resulting in a DoS condition. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ipsla-jw2DJmSv This advisory is part of the September 24, 2020, release of the Cisco IOS and IOS XE Software Security Advisory Bundled Publication, which includes 25 Cisco Security Advisories that describe 34 vulnerabilities. For a complete list of the advisories and links to them, see Cisco Event Response: September 2020 Semiannual Cisco IOS and IOS XE Software Security Advisory Bundled Publication.
A vulnerability in the IP Service Level Agreement (SLA) responder feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the IP SLA responder to reuse an existing port, resulting in a denial of service (DoS) condition.
The vulnerability exists because the IP SLA responder could consume a port that could be used by another feature. An attacker could exploit this vulnerability by sending specific IP SLA control packets to the IP SLA responder on an affected device. The control packets must include the port number that could be used by another configured feature. A successful exploit could allow the attacker to cause an in-use port to be consumed by the IP SLA responder, impacting the feature that was using the port and resulting in a DoS condition.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
This advisory is available at the following link:
https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ipsla-jw2DJmSv
This advisory is part of the September 24, 2020, release of the Cisco IOS and IOS XE Software Security Advisory Bundled Publication, which includes 25 Cisco Security Advisories that describe 34 vulnerabilities. For a complete list of the advisories and links to them, see Cisco Event Response: September 2020 Semiannual Cisco IOS and IOS XE Software Security Advisory Bundled Publication.
This vulnerability affects Cisco devices if they are running a vulnerable release of Cisco IOS XE Software and have the IP SLA responder feature enabled without additional parameters.
For information about which Cisco software releases are vulnerable, see the Fixed Software section of this advisory.
To determine whether the IP SLA responder feature is enabled for a device, log in to the device and use the show running-config | include ip sla responder command in the CLI. If the ip sla responder command is present in the global configuration, the IP SLA responder feature is enabled for the device, as shown in the following example:
Router# show running-config | include ip sla responder
ip sla responder
Router#
Only products listed in the Vulnerable Products section of this advisory are known to be affected by this vulnerability.
Cisco has confirmed that this vulnerability does not affect the following Cisco products:
There are no workarounds that address this vulnerability.
To mitigate the attack vector from unauthenticated attackers, ensure that the IP SLA responder has a password associated with it. To enable authentication on the IP SLA responder, see the following example:
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#key chain <1>
Router(config-keychain)#key <1>
Router(config-keychain-key)#key-string
Router(config-keychain-key)#exit
Router(config-keychain)#exit
Router(config)#ip sla key
Router(config)#ip sla key-chain <1>
Router(config)#^Z
Router#
Cisco has released free software updates that address the vulnerability described in this advisory. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license:
https://www.cisco.com/c/en/us/products/end-user-license-agreement.html
Additionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.
When considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page, to determine exposure and a complete upgrade solution.
In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.
Customers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC: https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html
Customers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.
To help customers determine their exposure to vulnerabilities in Cisco IOS and IOS XE Software, Cisco provides the Cisco Software Checker to identify any Cisco Security Advisories that impact a specific software release and the earliest release that fixes the vulnerabilities described in each advisory (“First Fixed”). If applicable, the tool also returns the earliest release that fixes all the vulnerabilities described in all the advisories identified (“Combined First Fixed”).
Customers can use the Cisco Software Checker to search advisories in the following ways:
After initiating a search, customers can customize the search to include all Cisco Security Advisories, a specific advisory, or all advisories in the most recent bundled publication.
Customers can also use the following form to determine whether a release is affected by any Cisco Security Advisory by entering a Cisco IOS or IOS XE Software release-for example, 15.1(4)M2 or 3.13.8S:
By default, the Cisco Software Checker includes results only for vulnerabilities that have a Critical or High Security Impact Rating (SIR). To include results for Medium SIR vulnerabilities, customers can use the Cisco Software Checker on Cisco.com and check the Medium check box in the drop-down list under Impact Rating when customizing a search.
For a mapping of Cisco IOS XE Software releases to Cisco IOS Software releases, refer to the Cisco IOS XE 2 Release Notes, Cisco IOS XE 3S Release Notes, or Cisco IOS XE 3SG Release Notes, depending on the Cisco IOS XE Software release.
The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.
This vulnerability was found during the resolution of a Cisco TAC support case.
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
| Version | Description | Section | Status | Date |
|---|---|---|---|---|
| 1.0 | Initial public release. | - | Final | 2020-SEP-24 |
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.
Vulmon