A vulnerability in the detection engine parsing of IPv6 packets for Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause high CPU utilization or to cause a denial of service (DoS) condition because the Snort process restarts unexpectedly. The vulnerability is due to improper input validation of the fields in the IPv6 extension header packet. An attacker could exploit this vulnerability by sending a malicious IPv6 packet to the detection engine on the targeted device. An exploit could allow the attacker to cause a DoS condition if the Snort process restarts and traffic inspection is bypassed or traffic is dropped. This vulnerability is specific to IPv6 traffic only. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link: https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20171004-fpsnort
A vulnerability in the detection engine parsing of IPv6 packets for Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause high CPU utilization or to cause a denial of service (DoS) condition because the Snort process restarts unexpectedly.
The vulnerability is due to improper input validation of the fields in the IPv6 extension header packet. An attacker could exploit this vulnerability by sending a malicious IPv6 packet to the detection engine on the targeted device. An exploit could allow the attacker to cause a DoS condition if the Snort process restarts and traffic inspection is bypassed or traffic is dropped. This vulnerability is specific to IPv6 traffic only.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
This advisory is available at the following link:
https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20171004-fpsnort
This vulnerability affects Cisco Firepower System Software Releases 6.0 and later when the software has one or more file action policies configured and is running on any of the following Cisco products:
To determine whether any file action policies are configured in Cisco Firepower System Software, administrators can do the following in the Firepower System dashboard:
Each file action policy specifies a set of rules and actions that defines how to handle files that meet specific criteria. If one or more policies specify a Block Files, Block Malware, or Detect Files action, the system is vulnerable.
No other Cisco products are currently known to be affected by this vulnerability.
Cisco has confirmed that this vulnerability does not affect Cisco Firepower System Software Releases 5.3, 5.4.0, or 5.4.1.
Cisco has confirmed that this vulnerability does not affect the following Cisco products:
This vulnerability can cause the Snort process to restart. While the Snort process is restarting, Snort detection could be bypassed or all network traffic inspection could fail. The behavior is platform and configuration dependent.
Firepower Platforms
Firepower platforms will exhibit the following behaviors:
Adaptive Security Appliance (ASA) 5500-X Series with FirePOWER Services
If the ASA release supports the CLI command sfr fail-open and this command is configured, traffic will bypass Snort and not be dropped.
There are no workarounds that address this vulnerability.
Cisco has released free software updates that address the vulnerability described in this advisory. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license: https://www.cisco.com/c/en/us/products/end-user-license-agreement.html
Additionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.
When considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories and Alerts page, to determine exposure and a complete upgrade solution.
In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.
Customers Without Service Contracts
Customers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC: https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html
Customers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.
Fixed Releases
Customers should upgrade to an appropriate release as indicated in the table in this section. To help ensure a complete upgrade solution, consider that this advisory is part of a collection that includes the following advisories:
In the following table, the left column lists major releases of Cisco software. The center column indicates whether a major release is affected by the vulnerability described in this advisory and the first minor release that includes the fix for this vulnerability. The right column indicates whether a major release is affected by all the vulnerabilities described in this collection of advisories and the current recommended release for those vulnerabilities.
| Cisco Firepower System Software | First Fixed Release for This Vulnerability | Recommended Release for This Vulnerability and All Vulnerabilities Described in the Collection of Advisories |
|---|---|---|
| Prior to 6.0 |
Not vulnerable |
N/A |
| 6.0.1 |
6.0.1.4 (future release) |
6.2.0.2 |
| 6.1.0 | 6.1.0.3 | 6.1.0.6 (future release) or 6.2.0.2 |
| 6.2.0 | 6.2.0.2 | 6.2.0.3 |
| 6.2.1 | Vulnerable; migrate to 6.2.2 |
6.2.2 |
| 6.2.2 | Not vulnerable |
6.2.2 |
To upgrade the Firepower System Software, use one of the following methods:
The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.
This vulnerability was found during resolution of a Cisco TAC support case.
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
| Version | Description | Section | Status | Date |
|---|---|---|---|---|
| 1.0 | Initial public release. | - | Final | 2017-October-04 |
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.
Vulmon