A vulnerability in the FTP inspection engine of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software fails to release spinlocks when a device is running low on system memory, if the software is configured to apply FTP inspection and an access control rule to transit traffic, and the access control rule is associated with an FTP file policy. An attacker could exploit this vulnerability by sending a high rate of transit traffic through an affected device to cause a low-memory condition on the device. A successful exploit could allow the attacker to cause a software panic on the affected device, which could cause the device to reload and result in a temporary DoS condition. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link: https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20181003-ftd-inspect-dos
A vulnerability in the FTP inspection engine of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition.
The vulnerability exists because the affected software fails to release spinlocks when a device is running low on system memory, if the software is configured to apply FTP inspection and an access control rule to transit traffic, and the access control rule is associated with an FTP file policy. An attacker could exploit this vulnerability by sending a high rate of transit traffic through an affected device to cause a low-memory condition on the device. A successful exploit could allow the attacker to cause a software panic on the affected device, which could cause the device to reload and result in a temporary DoS condition.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
This advisory is available at the following link:
https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20181003-ftd-inspect-dos
This vulnerability affects Cisco Firepower Threat Defense (FTD) Software Releases 6.2.3.x prior to Release 6.2.3.4, if FTP inspection is enabled, an access control rule with an associated FTP file policy is also enabled, and the software is running on any of the following Cisco products:
FTP inspection is enabled by default in Cisco FTD Software. For detailed information about the default settings for application inspection policies, refer to the Cisco ASA Series Firewall CLI Configuration Guide.
To determine which Cisco FTD Software release is running on a device, administrators can log in to the device, use the show version command in the CLI, and refer to the output of the command. The following example shows the output of the command for a device that is running Cisco FTD Software Release 6.2.0:
Vulmon
> show version
---------------------[ ftd ]---------------------
Model : Cisco ASA5525-X Threat Defense (75) Version 6.2.0 (Build 362)
UUID : 2849ba3c-ecb8-11e6-98ca-b9fc2975893c
Rules update version : 2017-03-15-001-vrt
VDB version : 279
----------------------------------------------------
To determine whether FTP file policies are associated with access control rules that are enabled for a device, administrators can do either of the following:
Only products listed in the Vulnerable Products section of this advisory are known to be affected by this vulnerability.
Cisco has confirmed that this vulnerability does not affect Cisco Adaptive Security Appliance (ASA) Software.
There are no workarounds that address this vulnerability. However, administrators can disable FTP inspection. To disable FTP inspection in Cisco FTD Software Releases 6.2 and later, use Cisco FMC to add the following FlexConfig policy:
policy-map global_policy
class inspection_default
no inspect ftp
Cisco has released free software updates that address the vulnerability described in this advisory. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license:
https://www.cisco.com/c/en/us/products/end-user-license-agreement.html
Additionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.
When considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories and Alerts page, to determine exposure and a complete upgrade solution.
In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.
Customers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC:
https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html
Customers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.
Customers are advised to upgrade to an appropriate release as indicated in the applicable table in this section. To help ensure a complete upgrade solution, consider that this advisory is part of a collection that includes the following advisories:
In the following table(s), the left column lists releases of Cisco software. The center column indicates whether a release is affected by the vulnerability described in this advisory and the first release that includes the fix for this vulnerability. The right column indicates whether a release is affected by all the vulnerabilities described in this collection of advisories and which release includes fixes for those vulnerabilities.
| Cisco FTD Software Release | First Fixed Release for This Vulnerability | First Fixed Release for All Vulnerabilities Described in the Collection of Advisories |
|---|---|---|
| 6.0 | Not vulnerable | Migrate to 6.1.0.7 |
| 6.0.1 | Not vulnerable | Migrate to 6.1.0.7 |
| 6.1.0 | Not vulnerable | 6.1.0.7 |
| 6.2.0 | Not vulnerable | 6.2.0.7 (future release) |
| 6.2.1 | Not vulnerable | Migrate to 6.2.2.5 (future release) |
| 6.2.2 | Not vulnerable | 6.2.2.5 (future release) |
| 6.2.3 | 6.2.3.4 6.2.3-851 6.2.3-9912 |
6.2.3.4 6.2.3-851 6.2.3-9912 |
1 The software image for Cisco Firepower Threat Defense Virtual (FTDv) for the AWS Cloud.
2 The software image for Cisco FTDv for the Microsoft Azure Cloud.
To upgrade to a fixed release of Cisco Firepower System Software, customers can do one of the following:
The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.
This vulnerability was found during internal security testing.
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
| Version | Description | Section | Status | Date |
|---|---|---|---|---|
| 1.0 | Initial public release. | - | Final | 2018-October-03 |
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.