A vulnerability in the Network Time Protocol (NTP) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to excessive use of system resources when the affected device is logging a drop action for received MODE_PRIVATE (Mode 7) NTP packets. An attacker could exploit this vulnerability by flooding the device with a steady stream of Mode 7 NTP packets. A successful exploit could allow the attacker to cause high CPU and memory usage on the affected device, which could cause internal system processes to restart or cause the affected device to unexpectedly reload. Note: The NTP feature is enabled by default. Cisco has released software updates that address this vulnerability. There are workarounds that address this vulnerability. This advisory is available at the following link: https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20190828-nxos-ntp-dos
A vulnerability in the Network Time Protocol (NTP) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
The vulnerability is due to excessive use of system resources when the affected device is logging a drop action for received MODE_PRIVATE (Mode 7) NTP packets. An attacker could exploit this vulnerability by flooding the device with a steady stream of Mode 7 NTP packets. A successful exploit could allow the attacker to cause high CPU and memory usage on the affected device, which could cause internal system processes to restart or cause the affected device to unexpectedly reload.
Note: The NTP feature is enabled by default.
Cisco has released software updates that address this vulnerability. There are workarounds that address this vulnerability.
This advisory is available at the following link:
https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20190828-nxos-ntp-dos
For information about which Cisco NX-OS Software releases were vulnerable at the time of publication, see the Fixed Software section of this advisory. See the Details section in the bug ID(s) at the top of this advisory for the most complete and current information.
The NTP feature is enabled by default. Administrators can use the show running-config | include "feature ntp" command from the Cisco NX-OS CLI to verify if the NTP feature has been manually disabled. If the command returns empty output, the NTP feature is enabled and the device is vulnerable. If the command returns the following output, the NTP feature is disabled and the device is not vulnerable:
Vulmon
nxos-switch# show running-config | include "feature ntp"
no feature ntp
Only products listed in the Vulnerable Products section of this advisory are known to be affected by this vulnerability.
Cisco has confirmed that this vulnerability does not affect the following Cisco products:
Exploitation of this vulnerability could cause the affected device to generate a constant stream of log messages similar to the following:
USER-3-SYSTEM_MSG: NTP Receive dropping message: Received NTP private mode packet. Drop count: x - ntpd
Customers are advised to contact their support organization to review the log messages and determine whether the vulnerability has been exploited on the device.
Administrators can use the following configuration command on affected devices to reduce the logging level for daemons from the default value of 3 to 2:
logging level daemon 2
This would eliminate device exposure to this issue but would cause the affected device to stop logging other syslog messages that might be useful to monitor device operations.
Customers who are not using the NTP feature can disable it with the no feature ntp configuration command.
When considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories and Alerts page, to determine exposure and a complete upgrade solution.
In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.
At the time of publication, the release information in the following table(s) was accurate. See the Details section in the bug ID(s) at the top of this advisory for the most complete and current information.
The left column lists Cisco software releases, and the right column indicates whether a release was affected by the vulnerability described in this advisory and which release included the fix for this vulnerability.
MDS 9000 Series Multilayer Switches: CSCvm51139
| Cisco NX-OS Software Release | First Fixed Release for This Vulnerability |
|---|---|
| 5.2 | Not vulnerable |
| 6.2 | 6.2(29) |
| 7.3 | 8.3(2) |
| 8.1 | 8.3(2) |
| 8.2 | 8.3(2) |
| 8.3 | 8.3(2) |
| 8.4 | Not vulnerable |
Nexus 3000 Series Switches and Nexus 9000 Series Switches in Standalone NX-OS Mode: CSCvm51138
| Cisco NX-OS Software Release | First Fixed Release for This Vulnerability |
|---|---|
| Earlier than 6.0(2)U6 |
Not vulnerable |
| 6.0(2)U6 | 7.0(3)I7(6) |
| 7.0(3)I | 7.0(3)I7(6) |
| 9.2 | 9.2(2) |
| 9.3 | Not vulnerable |
Nexus 3500 Platform Switches: CSCvm51142
| Cisco NX-OS Software Release | First Fixed Release for This Vulnerability |
|---|---|
| Earlier than 6.0(2)A6 | Not vulnerable |
| 6.0(2)A8 | 6.0(2)A8(11) |
| 7.0(3)I7 | 7.0(3)I7(6) |
| 9.2 | 9.2(2) |
| 9.3 | Not vulnerable |
Nexus 3600 Platform Switches and Nexus 9500 R-Series Switching Platform: CSCvm51138
| Cisco NX-OS Software Release | First Fixed Release for This Vulnerability |
|---|---|
| 7.0(3)F | 9.2(2) |
| 9.2 | 9.2(2) |
| 9.3 | Not vulnerable |
Nexus 5500, 5600, and 6000 Series Switches: CSCvm35740
| Cisco NX-OS Software Release | First Fixed Release for This Vulnerability |
|---|---|
| Earlier than 7.1(4) | Not vulnerable |
| 7.1(4) | 7.3(5)N1(1) |
| 7.1(5) | 7.3(5)N1(1) |
| 7.2 | 7.3(5)N1(1) |
| 7.3 | 7.3(5)N1(1) |
Nexus 7000 and 7700 Series Switches: CSCvm51139
| Cisco NX-OS Software Release | First Fixed Release for This Vulnerability |
|---|---|
| Earlier than 6.2 | Not vulnerable |
| 6.2 | 7.3(3)D1(1) |
| 7.2 | 7.3(3)D1(1) |
| 7.3 | 7.3(3)D1(1) |
| 8.0 | 8.2(3) |
| 8.1 | 8.2(3) |
| 8.2 | 8.2(3) |
| 8.3 | 8.3(2) |
| 8.4 | Not vulnerable |
For help determining the best Cisco NX-OS Software release for a Cisco Nexus Switch, administrators can refer to the following Recommended Releases documents. If a security advisory recommends a later release, Cisco recommends following the advisory guidance.
For help determining the best Cisco NX-OS Software release for Cisco UCS, refer to the Recommended Releases documents in the release notes for the device.Cisco MDS Series Switches
Cisco Nexus 1000V for VMware Switch
Cisco Nexus 3000 Series and 3500 Series Switches
Cisco Nexus 5000 Series Switches
Cisco Nexus 5500 Platform Switches
Cisco Nexus 6000 Series Switches
Cisco Nexus 7000 Series Switches
Cisco Nexus 9000 Series Switches
Cisco Nexus 9000 Series ACI-Mode Switches
The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.
This vulnerability was found during the resolution of a Cisco TAC support case.
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
| Version | Description | Section | Status | Date |
|---|---|---|---|---|
| 1.1 | Updated the MDS fixed release table. | Fixed Software | Final | 2019-October-08 |
| 1.0 | Initial public release. | - | Final | 2019-August-28 |
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.