A vulnerability in the implementation of the Simple Network Management Protocol (SNMP) Access Control List (ACL) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to perform SNMP polling of an affected device, even if it is configured to deny SNMP traffic. The vulnerability is due to an incorrect length check when the configured ACL name is the maximum length, which is 32 ASCII characters. An attacker could exploit this vulnerability by performing SNMP polling of an affected device. A successful exploit could allow the attacker to perform SNMP polling that should have been denied. The attacker has no control of the configuration of the SNMP ACL name. Cisco has released software updates that address this vulnerability. There are workarounds that address this vulnerability. This advisory is available at the following link: https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20190828-nxos-snmp-bypass
A vulnerability in the implementation of the Simple Network Management Protocol (SNMP) Access Control List (ACL) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to perform SNMP polling of an affected device, even if it is configured to deny SNMP traffic.
The vulnerability is due to an incorrect length check when the configured ACL name is the maximum length, which is 32 ASCII characters. An attacker could exploit this vulnerability by performing SNMP polling of an affected device. A successful exploit could allow the attacker to perform SNMP polling that should have been denied. The attacker has no control of the configuration of the SNMP ACL name.
Cisco has released software updates that address this vulnerability. There are workarounds that address this vulnerability.
This advisory is available at the following link:
https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20190828-nxos-snmp-bypass
At the time of publication, this vulnerability affected the following Cisco products if they were running a vulnerable release of Cisco NX-OS Software with a specific SNMP ACL configured:
For information about which Cisco NX-OS Software releases were vulnerable at the time of publication, see the Fixed Software section of this advisory. See the Details section in the bug ID(s) at the top of this advisory for the most complete and current information.
Administrators can use the show running-config | include "snmp-server" command to view the configured SNMP ACL for IPv4:
nxos-switch# show running-config | include "snmp-server"
snmp-server useruse-ipv4acl
If this command is present in the running configuration and the ACL name has the maximum length of 32 characters, the device should be considered vulnerable. This applies to IPv6 SNMP ACLs as well.
Only products listed in the Vulnerable Products section of this advisory are known to be affected by this vulnerability.
Cisco has confirmed that this vulnerability does not affect the following Cisco products:
As a workaround, administrators may reconfigure the SNMP ACL name to 31 characters or less.
When considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories and Alerts page, to determine exposure and a complete upgrade solution.
In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.
At the time of publication, the release information in the following table(s) was accurate. See the Details section in the bug ID(s) at the top of this advisory for the most complete and current information.
The left column lists Cisco software releases, and the right column indicates whether a release was affected by the vulnerability described in this advisory and which release included the fix for this vulnerability.
Nexus 3000 Series Switches, Nexus 3500 Platform Switches and Nexus 9000 Series Switches in Standalone NX-OS Mode: CSCvo17439
Cisco NX-OS Software Release | First Fixed Release for This Vulnerability |
---|---|
Earlier than 7.0(3) | Not vulnerable |
7.0(3)I41 | 7.0(3)I7(6)1 |
7.0(3)I7 | 7.0(3)I7(6) |
9.2 | 9.2(3) |
9.3 | Not vulnerable |
Nexus 3600 Platform Switches and Nexus 9500 R-Series Switching Platform: CSCvo17439
Cisco NX-OS Software Release | First Fixed Release for This Vulnerability |
---|---|
7.0(3)F |
9.2(3) |
9.2 | 9.2(3) |
9.3 | Not vulnerable |
For help determining the best Cisco NX-OS Software release for a Cisco Nexus Switch, administrators can refer to the following Recommended Releases documents. If a security advisory recommends a later release, Cisco recommends following the advisory guidance.
For help determining the best Cisco NX-OS Software release for Cisco UCS, refer to the Recommended Releases documents in the release notes for the device.Cisco MDS Series Switches
Cisco Nexus 1000V for VMware Switch
Cisco Nexus 3000 Series and 3500 Series Switches
Cisco Nexus 5000 Series Switches
Cisco Nexus 5500 Platform Switches
Cisco Nexus 6000 Series Switches
Cisco Nexus 7000 Series Switches
Cisco Nexus 9000 Series Switches
Cisco Nexus 9000 Series ACI-Mode Switches
The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.
This vulnerability was found during resolution of a Cisco TAC support case.
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
Version | Description | Section | Status | Date |
---|---|---|---|---|
1.0 | Initial public release. | - | Final | 2019-August-28 |
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.