A vulnerability in the web services interface of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause a buffer overflow on an affected system. The vulnerability is due to insufficient boundary checks for specific data that is provided to the web services interface of an affected system. An attacker could exploit this vulnerability by sending a malicious HTTP request. A successful exploit could allow the attacker to cause a buffer overflow condition on the affected system, which could disclose data fragments or cause the device to reload, resulting in a denial of service (DoS) condition. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-memc-dos-fncTyYKG This advisory is part of the April 2021 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: April 2021 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication.
A vulnerability in the web services interface of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause a buffer overflow on an affected system.
The vulnerability is due to insufficient boundary checks for specific data that is provided to the web services interface of an affected system. An attacker could exploit this vulnerability by sending a malicious HTTP request. A successful exploit could allow the attacker to cause a buffer overflow condition on the affected system, which could disclose data fragments or cause the device to reload, resulting in a denial of service (DoS) condition.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
This advisory is available at the following link:
https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-memc-dos-fncTyYKG
This advisory is part of the April 2021 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: April 2021 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication.
This vulnerability affects Cisco products if they are running a vulnerable release of Cisco ASA Software or FTD Software and have a vulnerable AnyConnect VPN or WebVPN configuration.
For information about which Cisco software releases are vulnerable, see the Fixed Software section of this advisory.
In the following table, the left column lists the Cisco ASA Software features that are affected by this vulnerability. The right column indicates the basic configuration for the feature from the show running-config CLI command. If the device is configured for one of these features, it is considered vulnerable.
| Cisco ASA Software Feature | Vulnerable Configuration |
|---|---|
| AnyConnect IKEv2 Remote Access (with client services) |
crypto ikev2 enable |
| AnyConnect SSL VPN |
webvpn |
| Clientless SSL VPN |
webvpn |
In the following table, the left column lists the Cisco FTD Software features that are affected by this vulnerability. The right column indicates the basic configuration for the feature from the show running-config CLI command. If the device is configured for one of these features, it is considered vulnerable.
| Cisco FTD Software Feature | Vulnerable Configuration |
|---|---|
| AnyConnect IKEv2 Remote Access (with client services)1,2 |
crypto ikev2 enable |
| AnyConnect SSL VPN1,2 |
webvpn |
2. Remote Access VPN features were first supported in Cisco FTD Software Release 6.2.2.
Only products listed in the Vulnerable Products section of this advisory are known to be affected by this vulnerability.
Cisco has confirmed that this vulnerability does not affect Cisco Firepower Management Center (FMC) Software.
There are no workarounds that address this vulnerability.
Cisco has released free software updates that address the vulnerability described in this advisory. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license:
https://www.cisco.com/c/en/us/products/end-user-license-agreement.html
Additionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.
When considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page, to determine exposure and a complete upgrade solution.
In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.
Customers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC: https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html
Customers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.
In the following table(s), the left column lists Cisco software releases. The center column indicates whether a release is affected by the vulnerability described in this advisory and the first release that includes the fix for this vulnerability. The right column indicates whether a release is affected by any of the vulnerabilities described in this bundle and which release includes fixes for those vulnerabilities.
ASA Software
| Cisco ASA Software Release | First Fixed Release for This Vulnerability | First Fixed Release for All Vulnerabilities Described in the Bundle of Advisories |
|---|---|---|
| Earlier than 9.81 | Not vulnerable | Migrate to a fixed release. |
| 9.8 | 9.8.4.34 | 9.8.4.35 |
| 9.9 | 9.9.2.85 | 9.9.2.85 |
| 9.101 | Migrate to a fixed release. | Migrate to a fixed release. |
| 9.12 | 9.12.4.13 | 9.12.4.18 |
| 9.13 | 9.13.1.21 | 9.13.1.21 |
| 9.14 | 9.14.2.8 | 9.14.2.13 |
| 9.15 | 9.15.1.7 | 9.15.1.15 |
1. Cisco ASA Software releases 9.7 and earlier, as well as Release 9.10, have reached end of software maintenance. Customers are advised to migrate to a supported release that includes the fix for this vulnerability.
FTD Software
| Cisco FTD Software Release | First Fixed Release for This Vulnerability | Recommended Fixed Release for All Vulnerabilities Described in the Bundle of Advisories |
|---|---|---|
| Earlier than 6.2.21 | Migrate to a fixed release. | Migrate to a fixed release. |
| 6.2.2 | Migrate to a fixed release. | Migrate to a fixed release. |
| 6.2.3 | Migrate to a fixed release. | Migrate to a fixed release. |
| 6.3.0 | Migrate to a fixed release. | Migrate to a fixed release. |
| 6.4.0 | 6.4.0.12 (May 2021) | 6.4.0.12 (May 2021) |
| 6.5.0 | Migrate to a fixed release. | Migrate to a fixed release. |
| 6.6.0 | 6.6.32 | 6.6.42 |
| 6.7.0 | 6.7.0.1 | 6.7.0.2 |
1. Cisco FMC and FTD Software releases 6.0.1 and earlier, as well as releases 6.2.0 and 6.2.1, have reached end of software maintenance. Customers are advised to migrate to a supported release that includes the fix for this vulnerability.
2. The First Fixed Release for the 6.6.0 code train was 6.6.3; however, due to upgrade issues associated with CSCvx86231 the recommended release is 6.6.4.
To upgrade to a fixed release of Cisco FTD Software, do one of the following:
The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.
Cisco would like to thank Joshua Perez and Phil Purviance for reporting this vulnerability.
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
| Version | Description | Section | Status | Date |
|---|---|---|---|---|
| 1.1 | Updated internal link to the Fixed Software section. | Vulnerable Products | Final | 2021-MAY-04 |
| 1.0 | Initial public release. | - | Final | 2021-APR-28 |
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.
Vulmon