SUPPORT COMMUNICATION- SECURITY BULLETIN HPSBHF03587 rev. 1 - Information Disclosure Vulnerability in Storage Media in Systems with Intel® Optane™ Memory Module with Whole Disk Encryption

Related Vulnerabilities: CVE-2018-3619  

There is an issue where some platforms configured with Microsoft* Bitlocker and an Intel® Optane™ memory module may be at risk of data remaining unencrypted and potentially accessible under specific conditions. Due to how Intel® RST software migrates data during the Intel® Optane™ memory enabling process, there is a small region on the non-Intel® Optane™ memory module that will be kept hidden from the host operating system. If Microsoft* Bitlocker enablement occurs after configuring the Intel® Optane™ memory media device, this small region will not benefit from the Whole Disk Encryption and as a result, end-user data in the small region could possibly be at risk.

Potential Security Impact:
Some platforms configured with Whole Disk Encryption and an Intel® Optane™ memory module, may be at risk of data remaining unencrypted and potentially accessible under specific conditions.
Source: HP, HP Product Security Response Team (PSRT)
Reported by: Intel

VULNERABILITY SUMMARY

There is an issue where some platforms configured with Microsoft* Bitlocker and an Intel® Optane™ memory module may be at risk of data remaining unencrypted and potentially accessible under specific conditions.
Due to how Intel® RST software migrates data during the Intel® Optane™ memory enabling process, there is a small region on the non-Intel® Optane™ memory module that will be kept hidden from the host operating system. If Microsoft* Bitlocker enablement occurs after configuring the Intel® Optane™ memory media device, this small region will not benefit from the Whole Disk Encryption and as a result, end-user data in the small region could possibly be at risk.
Reference Number
CVE -2018-3619, PSR-2018-0130, INTEL-SA-00114 (in English)
SUPPORTED SOFTWARE VERSIONS*: ONLY impacted versions are listed.
Intel® RST software that supports Intel® Optane™
BACKGROUND
For a PGP signed version of this security bulletin please write to: hp-security-alert@hp.com
CVSS 3.0 Base Metrics
Reference
Base Vector
Base Score
CVE-2018-3619
CVSS:3.0/AV:P/AC:L/PR:N/UI:N/S:C/C:H/I:N/A:N
5.3
RESOLUTION
Confirm your system is set up to support Intel® Optane™, then make sure Microsoft* Bitlocker is enabled before configuring the Intel® Optane™ memory module with Intel® Rapid Storage Technology (Intel® RST) software. Refer to the steps below.
  1. Go to the BIOS settings in F10 Setup/System Options and ensure the option is checked for configuring Intel® Optane™.
    Selecting Optane system option
  2. Enable Microsoft* Bitlocker.
  3. Launch Intel® RST user Interface/ Intel® Optane™ Memory User Interface.
  4. Disable Intel® Optane™ Memory (it will need a system restart to complete).
  5. Re-enable Intel® Optane™ Memory.
Detailed instructions are below.
Intel requires following these steps to ensure the Intel® Optane™ memory with Microsoft* Bitlocker is configured properly:
*Other names and brands may be claimed as the property of others (when using third-party trademarks and names).
Third Party Security Patches: Third party security patches that are to be installed on systems running HP software products should be applied in accordance with the customer's patch management policy.
Support: For issues about implementing the recommendations of this Security Bulletin, visit https://www.hp.com/go/contacthp to learn about your HP support options.
Report: To report a potential security vulnerability with any HP supported product, send email to: hp-security-alert@hp.com.
Subscribe: To initiate a subscription to receive future HP Security Bulletin alerts via email, visit https://www.hp.com/go/alerts.
Security Bulletin Archive: To view released Security Bulletins, search the HP Support Site for "security bulletin".
Software Product Category: The Software Product Category is represented in the title by the two characters following HPSB.
PI
HP Printing and Imaging
HF
HP Hardware and Firmware
GN
HP General Software
It is strongly recommended that security related information being communicated to HP be encrypted using PGP, especially exploit information.
To get the security-alert PGP key, please send an e-mail message as follows:
Subject: get key
System management and security procedures must be reviewed frequently to maintain system integrity. HP is continually reviewing and enhancing the security features of software products to provide customers with current secure solutions.

"HP is broadly distributing this Security Bulletin in order to bring to the attention of users of the affected HP products the important security information contained in this Bulletin.HP recommends that all users determine the applicability of this information to their individual situations and take appropriate action.HP does not warrant that this information is necessarily accurate or complete for all user situations and, consequently, HP will not be responsible for any damages resulting from user's use or disregard of the information provided in this Bulletin.To the extent permitted by law, HP disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose, title and non-infringement."
REVISION HISTORY : Version: 1 - July 9th, 2018 Initial release.