The function `OCSP_basic_verify` verifies the signer certificate on an OCSP response. In the case where the (non-default) flag OCSP_NOCHECKS is used then the response will be positive (meaning a successful verification) even in the case where the response signing certificate fails to verify. It is anticipated that most users of `OCSP_basic_verify` will not use the OCSP_NOCHECKS flag. In this case the `OCSP_basic_verify` function will return a negative value (indicating a fatal error) in the case of a certificate verification failure. The normal expected return value in this case would be 0. This issue also impacts the command line OpenSSL "ocsp" application. When verifying an ocsp response with the "-no_cert_checks" option the command line application will report that the verification is successful even though it has in fact failed. In this case the incorrect successful response will also be accompanied by error messages showing the failure and contradicting the apparently successful result. Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2).
Vulnerable Product | Search on Vulmon | Subscribe to Product |
---|---|---|
openssl openssl |
||
netapp santricity smi-s provider - |
||
netapp clustered data ontap - |
||
netapp smi-s provider - |
||
netapp clustered data ontap antivirus connector - |
||
netapp solidfire & hci management node - |
||
netapp solidfire, enterprise sds & hci storage node - |
||
netapp active iq unified manager - |
||
netapp snapmanager - |
||
netapp a250 firmware - |
||
netapp a700s firmware - |
||
netapp aff 500f firmware - |
||
netapp aff 8300 firmware - |
||
netapp aff 8700 firmware - |
||
netapp aff a400 firmware - |
||
netapp fabric-attached storage a400 firmware - |
||
netapp fas 500f firmware - |
||
netapp fas 8300 firmware - |
||
netapp fas 8700 firmware - |
||
netapp h300e firmware - |
||
netapp h300s firmware - |
||
netapp h410s firmware - |
||
netapp h500e firmware - |
||
netapp h500s firmware - |
||
netapp h700e firmware - |
||
netapp h700s firmware - |