A vulnerability in Juniper Networks SRX Series device configured as a Junos OS Enforcer device may allow a user to access network resources that are not permitted by a UAC policy. This issue might occur when the IP address range configured in the Infranet Controller (IC) is configured as an IP address range instead of an IP address/netmask. See the Workaround section for more detail. The Junos OS Enforcer CLI settings are disabled by default. This issue affects Juniper Networks Junos OS on SRX Series: 12.3X48 versions before 12.3X48-D100; 15.1X49 versions before 15.1X49-D210; 17.3 versions before 17.3R2-S5, 17.3R3-S8; 17.4 versions before 17.4R2-S9, 17.4R3-S1; 18.1 versions before 18.1R3-S10; 18.2 versions before 18.2R2-S7, 18.2R3-S3; 18.3 versions before 18.3R1-S7, 18.3R3-S2; 18.4 versions before 18.4R1-S6, 18.4R2-S4, 18.4R3-S1; 19.1 versions before 19.1R1-S4, 19.1R2-S1, 19.1R3; 19.2 versions before 19.2R1-S3, 19.2R2; 19.3 versions before 19.3R2-S1, 19.3R3; 19.4 versions before 19.4R1-S1, 19.4R2.
| Vulnerable Product | Search on Vulmon | Subscribe to Product |
|---|---|---|
juniper junos 12.3x48 |
||
juniper junos 15.1x49 |
||
juniper junos 17.3 |
||
juniper junos 17.4 |
||
juniper junos 18.1 |
||
juniper junos 18.2 |
||
juniper junos 18.3 |
||
juniper junos 18.4 |
||
juniper junos 19.1 |
||
juniper junos 19.2 |
||
juniper junos 19.3 |
||
juniper junos 19.4 |
Vulmon